Dental ImagingMoritaVeraviewepocs 2D
Morita Veraviewepocs 2D Digital Panoramic and Cephalometric Unit
Details Inquiry
Dental Imaging
KaVo OP 3D Pro 3-in-1 Panoramic, Cephalometric and CBCT Unit
- Model
- OP 3D Pro
- Brand
- KaVo
KaVo OP 3D Pro 3-in-1 platform for panoramic, cephalometric and CBCT imaging with SMARTVIEW, Low Dose Technology and FOV up to 13 x 15 cm.
Key features
- Upgradeable platform: panoramic, cephalometric and CBCT in one unit
- SMARTVIEW scout to confirm and fine-tune the FOV position
- Automatic Dose Control (ADC) in 3D and panoramic for patient-specific exposure settings
- Low Dose Technology (LDT) with up to 80% dose reduction compared with the standard 3D protocol
- Four 3D resolution levels: LDT, Standard, High and Endo (85 µm voxel for the smallest FOV)
- Metal Artifact Reduction (MAR) tool usable in all FOVs
- Multilayer pan: five panoramic images from one scan, with the same time and dose
- ORTHOfocus for automatic selection of the optimal panoramic layer
Description
ORTHOPANTOMOGRAPH OP 3D Pro is a comprehensive 3-in-1 platform covering the entire maxillofacial region. It combines an advanced panoramic system with cephalometry, 3D CBCT or both, and depending on configuration can later be upgraded to CBCT or cephalometry.
The SMARTVIEW scout image taken before CBCT lets you check and correct the FOV position, and the FOV can be placed freely in the horizontal and vertical directions over the region of interest. The 10-inch touch user interface makes setting parameters for all modalities simple and fast.
Technical specifications
| Wheelchair access | Yes |
|---|---|
| Panoramic scan time | 8.6 to 16.1 s |
| Cephalometric scan time | 10 to 20 s |
| 3D scan time | small panel: 11 to 21 s, OP 3D Pro: 11 to 42 s |
| Panoramic / cephalometric detector | CMOS, 100 µm pixel size |
|---|---|
| 3D detector | CMOS |
| Image field height | Panoramic 148 mm, cephalometric 170 to 260 mm |
|---|---|
| Voxel size | small panel: 85 to 330 µm, OP 3D Pro: 85 to 420 µm |
| Small panel image volume | 61 x 41 and 61 x 78 mm (HxW) |
| OP 3D Pro image volume | 50 x 50, 61 x 78, 78 x 78, 78 x 150, 130 x 150 mm (HxW) |
| Tube voltage | 57 to 90 kV |
|---|---|
| Tube current | 3.2 to 16 mA |
| 3D exposure time | small panel: 1.2 to 12.6 s, OP 3D Pro: 1.2 to 8.7 s |
| Focal spot | 0.5 mm (IEC 336) |
|---|---|
| Anode heat storage | 35 kJ, 49 000 HU |
| Minimum total filtration | 3.2 mm Al |
| DICOM | Yes |
|---|
| Weight | 200 kg, 250 kg with cephalometric |
|---|---|
| Minimum room height | 2050 to 2450 mm |
Applications
- General dentistry, endodontics and periodontics
- Implantology and prosthodontics
- Orthodontics
- Oral and maxillofacial surgery
- Airway studies
- FOV 6 x 4 and 5 x 5 cm for single-site implants and localized diagnostics
- FOV 6 x 8 cm for the full dental arch and surgical guide use
- FOV 8 x 15 cm for both jaws, airway, upper cervical spine, sinuses and TMJ
- FOV 13 x 15 cm for the entire maxillofacial region
- Panoramic programs: Standard, Pediatric, Ortho Zone, Orthogonal, Wide Arch, Lat TMJ, PA TMJ, Maxillary Sinus and Bitewing
Downloads
Related products
- Dental Imaging
Dental Imaging
Dental Imaging
Dental Imaging
Related knowledge
View all
Tech tip · Dental Imaging
ORTHOPANTOMOGRAPH OP 3D Pro User Manual
User manual and technical specifications for the OP 3D Pro digital dental imaging system with panoramic, cephalometric and Cone Beam 3D programs.
Instrumentarium Dental
Tech tip · Dental Imaging
Planmeca ProMax Cephalostat with ProTouch User's Manual
User's manual for the Planmeca ProMax Cephalostat with ProTouch touchscreen, for accurate head positioning and cephalometric imaging on 2D and 3D ProMax units.
Planmeca