Tech tip2 min read
Tech Tip 118: IMAGELINK Microfilm Processing Chemicals
IMAGELINK G 3231C and G 3343C concentrates, ready-to-use table-top solutions and EcoPos 305 chemistry, with dilution and processing data.
IMAGELINK processing chemicals are a new generation of environmentally friendly, high-capacity solutions for trouble-free processing. The result is less chemical handling, lower consumption and less waste.
Highlights
- Developer G 3231C and Fixer G 3343C concentrates for medium tank and deep tank processors, in 5 liter containers
- Ready-to-use solutions that need no dilution for table-top processors
- Dedicated chemistry for IMAGELINK EcoPos 305 film
Concentrates for IMAGELINK film
| Parameter | Value |
|---|---|
| Products | Developer G 3231C, Fixer G 3343C |
| Packaging | 5 liters |
| Dilution ratio | 1 + 3 |
| Processing temperature | 27°C (80°F) |
| Processing time | 60 seconds |
| Automatic replenishment | About 175 ml of diluted solution per meter of film |
Ready to Use solutions
- 5L IMAGELINK ARCHIVE RTU DEV
- 5L IMAGELINK ARCHIVE HF DEV
- 5L IMAGELINK ARCHIVE RTU FIX
These solutions suit all table-top processors such as the IMAGELINK Archive Processor, Agfa or Microform FP500, Cordell and similar short-cycle processors, and deliver consistent results without special mixing or monitoring equipment.
IMAGELINK EcoPos 305 film chemistry
| Parameter | Value |
|---|---|
| Products | IMAGELINK EcoPos 305 Developer, IMAGELINK EcoPos 305 Fixer |
| Packaging | 4 x 5L |
| Dilution ratio | 1 + 2 |
| Suitable processors | All deep tank processors |
| Temperature (starting point) | 37°C (98.6°F) |
| Automatic replenishment (starting point) | 250 ml per meter of 105 mm film |
Source:Eastman Park Micrographics(epminc.com)(opens in a new tab)
Frequently asked questions
What processing parameters are needed for IMAGELINK film with Developer G 3231C and Fixer G 3343C concentrates?
The processing temperature is 27°C (80°F), processing time is 60 seconds, dilution ratio is 1 + 3, and automatic replenishment is about 175 ml of diluted solution per meter of film.
In what packaging are Developer G 3231C and Fixer G 3343C concentrates supplied and for which processors are they suitable?
They are supplied in 5 liter containers and are suitable for medium tank and deep tank processors.
Which table-top processors are suitable for IMAGELINK ARCHIVE ready-to-use solutions?
They suit all table-top processors such as the IMAGELINK Archive Processor, Agfa or Microform FP500, Cordell and similar short-cycle processors.
What are the starting temperature and automatic replenishment rate for IMAGELINK EcoPos 305 film chemistry?
The starting temperature is 37°C (98.6°F) and the starting automatic replenishment rate is 250 ml per meter of 105 mm film.
What is the dilution ratio for IMAGELINK EcoPos 305 Developer and Fixer?
The dilution ratio for IMAGELINK EcoPos 305 Developer and Fixer is 1 + 2.
Attachments
Comments
No comments yet. Be the first to share your view.
Leave a comment
More to read
Tech tip · Dental Imaging
Planmeca ProMax Cephalostat with ProTouch User's Manual
User's manual for the Planmeca ProMax Cephalostat with ProTouch touchscreen, for accurate head positioning and cephalometric imaging on 2D and 3D ProMax units.
Planmeca
Tech tip · Dental Imaging
ORTHOPANTOMOGRAPH OP 3D Pro User Manual
User manual and technical specifications for the OP 3D Pro digital dental imaging system with panoramic, cephalometric and Cone Beam 3D programs.
Instrumentarium Dental
Tech tip · Microfilm
Tech Tip 91: Choosing the Correct IMAGELINK Product
IMAGELINK camera, duplicating, Archive Writer and COM films and processing chemicals grouped by equipment and application, with catalog numbers.
Eastman Park Micrographics