Skip to content
Doruntech
فا
CPI Indico 100 RAD X-ray Generator - Image 1 of 2
CPI Indico 100 Generators

CPI Indico 100 RAD X-ray Generator

Model
Indico 100 RAD
Brand
CPI

Indico 100 RAD radiographic generator from 32 to 100 kW with output up to 400 kHz, kV/AEC and kV/mAs modes and one- or two-tube operation.

Description

Indico 100 RAD radiographic generator from 32 to 100 kW with output up to 400 kHz, kV/AEC and kV/mAs modes and one- or two-tube operation.

  • Dedicated console for radiographic (RAD) applications
  • Power levels of 32, 40, 50, 65, 80 and 100 kW with high frequency output up to 400 kHz
  • kV/AEC, kV/mAs and kV/mA/Time operating modes, with 150 kV standard
  • 1 or 2 tube operation, kV/mAs Stepping, multiple DR and AEC interfaces, Falling Load
  • 5 programmable image receptors

Indico 100 Touchscreen (RAD and RF)

  • 15 inch Touchscreen display with PowerPC-based CPU
  • More than 20,000 anatomical programs (APR) and technique selection with memory
  • Multilingual support, backup and restore, custom graphical interface
  • Adjustable viewing angle, wall mount and optional hand switch

GenWare service software

  • Generator programming through GenWare or the operator console
  • Very quick and easy installation
  • System diagnostics for remote analysis
  • Automatic X-ray tube calibration
  • Library of more than 300 X-ray tubes

Technical specifications

General
Control processor16 Bit CPU
StarterIntegrated Low Speed Starter or Dual-Speed Starter
Auxiliary cabinet120/240 VAC (optional)
Technique selectionkV/AEC, kV/mAs or kV/mA/ms
DocumentationManuals on CD
X-ray generator
RAD or RF power levels32/40/50/65/80/100 kW
Special Procedures power levels80/100 kW
Generator frequencyUp to 400 kHz
Inverter moduleFET Inverter Modules
GeneratorHigh Frequency Output (400 kHz max.)
kVp range and steps40 - 150 kV in 1 kV steps
kVp accuracy±(2% + 1 kV) for 70 - 85 kV, ±(5% + 1 kV) for 40 - 150 kV
High voltage ripple<1 kV @ 110 kV
Tube current32 kW: 10 - 400 mA; 40 kW: 10 - 500 mA; 50 kW: 10 - 630 mA; 65 kW: 10 - 800 mA; 80 and 100 kW: 10 - 1000 mA
mA accuracy±(5% + 1 mA) for exposures > 5 ms, ±20% for exposures ≤ 5 ms
Exposure time1 ms to 6300 ms in 1 ms steps
Exposure timer accuracy±(2% + 0.5 ms) from 5 to 6300 ms, ±(10% + 1 ms) for ≤ 5 ms
mAs range (non-AEC)32 and 40 kW: 0.1 - 630 mAs; 50 to 100 kW: 0.1 - 1000 mAs
mAs accuracy±(10% + 0.2 mAs) for exposures > 5 ms
Tube
Rotor supplyLow Speed Starter, Dual Speed Starter optional
Connectivity
Communication portsRS232, RS422
Power
Maximum voltage150 kV standard
Power supply1 Phase 230 VAC, 3 Phase 400 or 480 VAC
Power input, 32 and 40 kW models1 Φ/208-230 VAC or 3 Φ/400-480 VAC
Power input, 50 to 100 kW models3 Φ/400-480 VAC
Line voltage range±10%
Manual power derating<10% line
Dimensions & weight
Cabinet dimensions549 x 457 mm, height 1226 to 1480 mm depending on configuration

Accessories

  • Touchscreen console with wall mount (optional)
  • Hand switch (optional)
  • Auxiliary cabinet (optional)
  • DAP or Air Kerma display (optional)

Where this system is installed

Projects where this product was installed and commissioned.

View all

This site only uses essential cookies to keep forms working and secure. By continuing, you accept our terms and privacy policy.

Learn more